Did you know that tile roofs are one of the most popular roofing materials in the United States? While they are often thought to be high-maintenance and difficult to repair, there are actually a number of common issues that can arise with tile roofs.
In this blog post, we’ll take a look at some of the most common problems that can occur, as well as how to fix them. So, if you’re considering installing a tile roof or you’ve already made the switch, make sure to keep reading to know when to hire a roofing company Ann Arbor!
Sliding tiles are a common problem with tile roofs. This can be caused by several factors, including improper installation, inadequate flashing, and lack of maintenance. In many cases, sliding tiles can be prevented by simply ensuring that the roof is properly installed and maintained.
However, if sliding tiles are already a problem, there are a few things that can be done to fix the issue. One option is to install straps or cables to hold the tiles in place. Another option is to replace the damaged tiles with new ones.
In some cases, it may also be necessary to install a new layer of flashing or to make other repairs to the roof. With proper care and maintenance, most tile roofs will last for many years without any problems.
Another common problem homeowners have with tile roofs face are cracked tiles. Cracked tiles can be caused by a number of factors, including severe weather, tree limbs rubbing against the roof, or even just age. While some cracked tiles can be repaired, others will need to be replaced.
Replacing a tile is not a difficult process, but it is important to make sure that the new tile is the same size and shape as the original. Otherwise, the new tile may not fit properly and could cause more damage to the roof. Homeowners should also be aware that cracked tiles are often just the tip of the iceberg; they may be indicative of more serious problems such as water damage or structural instability.
As such, it is always best to have a professional inspect the roof as soon as possible after discovering any cracked tiles.
One of the most common problems with tile roofs is that the nails holding the tiles in place can become loose over time. This can be caused by a variety of factors, including weathering, thermal expansion and contraction, and vibrations from strong winds.
When nails become loose, they can fall out of the roof, leaving gaps that allow water to enter the building. In addition, loose nails can also cause the tiles to shift and rub against each other, which can lead to damage. While it is possible to re-secure loose nails, it is often best to schedule a professional inspection to ensure that all of the nails are properly tightened.
By taking this preventive measure, you can help extend the life of your roof and avoid costly repairs.
Maintaining your roof regularly will help secure your house. Plus, it lets you know how to detect roofing issues. Other roofing system areas are more prone to getting damaged. Keep on reading this article to know about what can weaken these roofing areas so that you can prevent or spot the issues, and get immediate repairs if required.
5 Typical Problem Parts of Roofing Systems
Shingles provide good protection. However, they can be susceptible to problems like curling and discoloration. Broken or missing shingles can lead to damages like holes, rotting, etc. The discoloration is also an indicator of a roof leak, which can turn out to be a huge hole in your ceiling. Curling happens because of insufficient ventilation, poor installation of fasteners, or high nails. They invite ice, snow, water, missing shingles, and water seepage. All of these issues most likely lead to rot.
Fascia, which is found beneath the roof edge, is the board along the perimeter of your house. While it can improve the appearance of your roof, it will protect the edges from water at the same time. Since it’s commonly made of wood, continual exposure can make it rot eventually. Search for signs of rot, like deteriorating paint, and book for roofing repairs whenever you can spot a problem. Request the roofer to apply water-resistant paint to prolong its lifespan.
The surface under the overhanging roof eave parts, which is known as the soffit, has tiny holes that enable house heat and moisture to escape. Soffits also ventilate the home’s top to avoid rot problems in the sheathing and rafters. Utilize binoculars to check the soffit monthly for rotted sections, cracks, and holes that invite water infiltration and vermin, and get expert repairs once you can see any of these problems.
Downspouts and gutters enable rainwater to efficiently drain off the roof. Once you get a clogged drainage system, the rainwater tends to back up beneath the shingles, which promotes leaks, mold growth, and rot. Moreover, water can weaken and pool around the foundation of the homes. To keep your gutter from forming clogs from twigs, leaves, and other organic debris, install gutter guards or clean the gutters.
You can use metal flashing to seal roof edges, perimeters, drains, walls, and valleys to prevent gaps or holes that let small animals, insects, and rainwater inside. Metal flashings are usually made out of aluminum or galvanized steel. However, sooner or later, they will become loose due to storm damage and high winds or deteriorates from oxidation. Make sure to have your flashing checked from time to time for signs of corrosion or lose parts, particularly after storms.
Over the years, your roof can deal with many problems. Though other roof issues are pretty easy to spot, some of them still require aid from expert roofing contractors. If you think your roofing has issues that you cannot fix, contact your trusted roofing company today.